European CE safety shoes protection standard / European standard for safety shoes

EN344-1/EN ISO 20344

This standard specifies the requirements for safety shoes, protective boots and work shoes, as well as the testing methods for these types of shoes. This standard is to be used in conjunction with EN345-1/EN ISO 20345, EN346-1/EN ISO 20346 and EN347-1/EN ISO 20347. These three standards respectively stipulate various requirements for the protection registration and function of the above several types of safety shoes.

Safety shoes specifications EN345-1/EN ISO 20345

In accordance with EN344-1/EN ISO 20344, this European standard specifies the basic and additional requirements for safety shoes marked with an "S" fit. These safety shoes are designed and equipped with a steel safety head that can withstand up to 200 joules. The impact and the extrusion of 15 kN.

EN345-1 is the main standard for CE safety shoes in Europe. At present, European standard safety shoes are generally produced according to EN345-1. The EN345-1 safety shoes standard is divided into six categories: SB, SBP, S1, S1P, S2 and S3.

SB is the most basic category of S-type safety shoes. SB safety shoes stipulate that the safety shoes are lined with wear-resistant and sweat-absorbent. The steel head with impact resistance has shock-proof and sweat-absorbing insoles, and the outsole needs to be wear-resistant and shock-proof. Slip-proof advantage.

SBP-type safety shoes have an anti-puncture steel midsole compared to SB-type safety shoes.

Compared with SBP safety shoes, S1 safety shoes have increased the oil resistance of the outsole and the anti-static function of the outsole.

S1P safety shoes have an anti-piercing steel midsole compared to S1 safety shoes.

S2 safety shoes have added the skin anti-splash function on the basis of S1.safety shoes

S3 safety shoes are the highest category in the European CE EN345-1/EN ISO 20345 standard. S3:S2+ increases the function of leather to prevent water splashing.

P-type safety shoes specifications EN346-1/EN ISO 20346 safety shoes designed and equipped with steel safety toe caps, can withstand up to 100 joules of impact and 10 kN of extrusion

Specifications for O-type safety shoes Working shoes such as EN347-1/EN ISO 20347 are different from safety shoes and protective shoes. Because they are not equipped with a safety toe cap, they are not resistant to impact and squeezing.